Table of Contents
Advertisement
Aspect
Adjust image aspect
ratio.
Ratio
Set the display to auto-
matically adjust screen
Auto
Format
aspect ratio when the
SCART input is used.
Select video signal input
Video
source for PIP/PBP
Input
function.
Select graphics signal
Graphics
input source for PIP/
Input
PBP function.
30
On-Screen Display (OSD) Menu
Use the
and
buttons on
the remote control or the
Volume
and Volume
buttons on the display to
change selection.
Use the
and
buttons on
the remote control or the
Volume
and Volume
buttons on the display to
change selection.
Use the
and
buttons on
the remote control or the
Volume
and Volume
buttons on the display to
change selection.
Use the
and
buttons on
the remote control or the
Volume
and Volume
buttons on the display to
change selection.
• Full Screen - Enlarge the
standard 4:3 video signal
(e.g. TV signal) to 16:9 full
screen video signal. When
the original input video
source is 16:9 in ratio (e.g.
DVD signal), no change will
occur.
• 4:3 Format - Display the
standard 4:3 video signal
(e.g. TV signal) in the center
of the screen at the ratio of
4:3. The screen does not
change, but black blocks
appears in the left and right
sides of the screen. When the
input video source is 16:9 in
ratio, deformation will occur
on the screen.
• Letterbox -Fill the entire 4:3
screen with a 4:3 video
signal. The redundant part
on the upper and bottom of
the image will be removed
and the image will extend
vertically and horizontally to
fill the full screen. When the
input video source is 16:9 in
ratio (e.g. DVD signal), no
change will occur.
• Anamorphic - Fill the entire
screen with a 4:3 video
signal. Some deformations
may be identified on the
edge of the image. When the
input video source is 16:9 in
ratio (e.g. DVD signal), no
change will occur.
• Real - Display the actual size
of the video source without
zooming.
• Yes
• No
TV, AV1, AV1 RGB, AV2,
AV2-S, AV3, AV3-S, AV4,
AV4-S
• PC
• Component 1
• Component 2
• DVI
Advertisement
Table of Contents
