This chapter describes how to set up the wireless voice gateway on your local area network
(LAN), connect to the Internet, and perform basic configuration.
The Gateway Front Panel
The front panel of the Voice Gateway contains status LEDs.
Figure 1-1
You can use the LEDs to verify connections. The following table lists and describes each LED on
the front panel of the Voice Gateway.
Table 1-1. LED Descriptions
LED
Description
Power
• Green solid: Power is supplied to the gateway.
• Green blink: The battery is charged.
• Amber solid: Discharge battery (when 110V power is shut down).
• Amber blink: The battery capacity is low (<10%).
• Off: Power is not supplied to the gateway.
Installing the Gateway
v2.0, November 2007
Chapter 1
1-1