Pan Tilt Setup - EverFocus EPTZ850 User Manual

ADDR TYPR: Choose "Add Type", then choose address from "Add
●
Soft"(0-255), press button "Exit" and camera reboot, address was changed
to address of "ADDR SOFT"
Note: The set soft address will become invalid once the DIP switch is turned.
4.4 Pan Tilt Setting
Pan tilt setting menu
<SET ZONE SCAN>: setup LEFT/RIGHT limit position between two

presets.
Choose < SET ZONE SCAN> to enter:
<SET ZONE SCAN SCOPE>: Setup LEFT/RIGHT limit positions and

Figure 4.3 ADDR SETTING
MOTION
<SET ZONE SCAN>
POWER UP
PARK TIME
PARK ACTION
BACK
EXIT
Figure 4.4 Pan tilt setting menu
ZONE SCAN
SET SCANNING SCOPE
CLEAR ZONE SCAN
ZONE SCAN SPEED
BACK
EXIT
Figure 4.4.1 SET ZONE SCAN
13/ 24
NONE
15s
NONE
16