Table of Contents
Advertisement
means not displaying.
< P/T DEG>: It is vertical and horizontal angles display when PTZ moves "ON"
means displaying, while "OFF" means not displaying.
Back：Return to main menu。
Exit： Exit menu.
5.Trouble Shooting
5.1 Simple list of malfunctions removal
Malfunctions
Power cable is connected incorrectly
No action and
Power supply is damaged.
image when
Bad connection for power cable
powered on
Incorrect baud rate and ID code
With
image
RS485 cable disconnected, short- circuited or
connected incorrectly.
after
self-checking,
Bad connection of RS485 cable wiring.
but
out
of
control
One RS-485 cable is broken.
Video cable is bad connected.
Video unstable
Power supply is not enough.
Possible Reasons
20/ 24
Solution
Correct the connection
Change
Eliminate the bad
connection
Reset the DIP Switch
Check RS-485 connection
cable
Check RS-485 connection
cable
Check RS-485 connection
cable
Eliminate the bad
connection
Change
Advertisement
Table of Contents
