Replacing The Processor - Gateway E4610D Reference Manual

5
6
7
8

Replacing the processor

To replace the heat sink and processor:
1
2
52
CHAPTER 4: Upgrading Your Computer
Insert the new I/O panel board into the computer, then
replace the screw.
Connect the I/O panel cable to the new I/O panel.
Replace the front bezel by following the instructions in
"Removing and installing the front bezel" on page
Replace the side panel by following the instructions in
"Opening and closing the case" on page
Tools
Phillips screwdriver
Remove the side panel by following the instructions in
"Opening and closing the case" on page
Remove the fan by pulling it away from the system
board.
38.
37.
37.