Gateway E4610D Reference Manual page 15

Component
Power connector
Voltage switch
Case cover
thumbscrew
Audio (line) in/side
speaker jack (blue)
Ethernet (network)
jack
Parallel port
PS/2 mouse port
(green)
Modem (line) jack
(optional)
Line out
(headphones)/front
speaker jack (green)
Microphone jack
(pink)
USB ports
Monitor (VGA) port
Serial port
www.gateway.com
Icon Description
Plug the power cord into this connector.
Make sure this switch is positioned correctly
for the power in your area. For more
information, see
selection" on page
Remove these thumbscrews to open the side
panel of the case.
Plug an external audio input source (such as
a stereo) into this jack so you can record
sound on your computer. For 5.1 surround
sound, plug the surround sound side
speakers to this jack.
Plug an Ethernet network cable or a device
(such as a cable or DSL modem) into this
jack. For more information, see "Learning
about the Internet" in your online User Guide
and "Connecting to a broadband modem or
network" on page
Plug a parallel device (such as a printer)
into this port.
Plug a PS/2 mouse into this port.
Plug a modem cable into this jack. For more
information, see
modem" on page
Plug headphones or amplified speakers into
this jack. For 5.1 surround sound, plug the
surround sound front speaker to this jack.
Plug a microphone into this jack.
Plug USB (Universal Serial Bus) devices (such
as a USB printer, scanner, camera, keyboard,
or mouse) into these ports. For more
information, see
scanner, or other device" on page
Plug a VGA monitor cable into this port.
Plug a serial device into this port.
"Checking the voltage
15.
16.
"Connecting a dial-up
16.
"Installing a printer,
33.
9