Gateway E4610D Reference Manual page 60

5
6
7
8
9
10
54
CHAPTER 4: Upgrading Your Computer
Release the processor by pushing down on the lever and
then lifting it completely up.
Remove the processor from the system board.
Install the new processor onto the system board making
sure that Pin 1 on the processor (indicated by the
silk-screened arrow on the corner of the processor)
aligns with Pin 1 on the processor socket (indicated by
the absence of a pin hole in the processor socket), then
return the lever to its locked position.
Place the heat sink on the system board, then tighten the
screws that secure it to the system board.
Connect the fan cable to the system board, then insert
the fan into place.
Replace the side panel.