12 Cleaning The Fire / Cleaning The Glass Panel & Fuel-Bed; User Replaceable Parts 2 - Flavel Calibre FBFC**MN2 Installation, Maintenance & User Instructions

Coal effect balanced flue gas fire
Hide thumbs Also See for Calibre FBFC**MN2:
Table of Contents

Advertisement

5.11
CLEANING THE FIRE - WARNING
Before attempting any cleaning operation ensure that the fire has been allowed to
fully cool. Consult your retailer to determine what trim / fret / fascia option was
supplied with your fire. If a real Brass fret was supplied with the fire it will
therefore will discolour with use and should be cleaned with a proprietory metal
polish. A laquered brass fret should not discolour and should only be cleaned with
a clean, damp cloth. The chrome, black & brass effect trims and chrome effect fret
that are supplied with the fire (dependent upon model chosen) should only also
be cleaned with a clean, damp cloth.
The trim is best cleaned in position on the fire when the appliance is not running
and is cool. Black painted metal parts should be gently cleaned with a damp cloth.
5.12
CLEANING THE FUEL-BED / GLASS PANEL
NEVER USE THE FIRE WITHOUT THE GLASS PANEL IN
POSITION, OR IF BROKEN OR CRACKED.
We do not recommend cleaning of the coals or fuelbed components as these are
fragile and damage may result. None of these parts must be washed or
exposed to any cleaning agents or water. Any damaged parts must be
replaced by contacting your dealer or telephoning BFM Europe Ltd. on the number
stated on the rear cover of this book. The coals must only be replaced with a
complete and genuine replacement set and the fire must never be run with the
wrong number or damaged coals. The fuel-bed must be carefully re-assembled as
stated in section 5.10
To clean the glass panel, please remove it from the product as described overpage
Use a clean damp cloth and ceramic glass cleaner to remove any stains or
deposits frm the glass panel. Do not using scouring pads as this may scratch the
surface finish of the glass panel.
PLEASE NOTE :- The glass will require cleaning periodically. Condensation
produced by the products of combustion will create marks on the inside face of the
glass panel.
5.13
Complete fuel-bed / ceramic set
L/H front ceramic
R/H front ceramic
L/H rear ceramic
R/H rear ceramic
USER REPLACEABLE PARTS
B-130100
B-130060
B-130070
B-130080
B-130090
62

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Calibre fbfc**rn3Calibrefbfc**en3Calibrefbfc**mp2

Table of Contents