Setting The Time, Temperature And Day On The Handset (Remote Models) - Flavel Calibre FBFC**MN2 Installation, Maintenance & User Instructions
Coal effect balanced flue gas fire
Hide thumbs
Also See for Calibre FBFC**MN2:
Table of Contents
Advertisement
3.7
SETTING THE TIME, DATE & TEMPERATURE ON THE REMOTE
HANDSET
3.7.1
Fit the 2 off AA batteries to the handset by removing the cover on the
rear of the handset and inserting the batteries, ensure the correct +/-
polarity is observed. Following insertion of the batteries the screen
displayed will be as shown below in figure 20.
Fig. 20
3.7.2
Hold the handset with one hand ensuring your hand is wrapped around
the back and that your hand is in contact with both sides of the
handset. The green light of the "unlock" symbol should light and the
screen displayed will be as shown overpage in figure 21.
3.7.3
The "H" symbol as indicated in figure 30 overpage indicates that the
timer can now be set in either 24hr or 12hr mode. Press the + or -
buttons on the handset to toggle between the two settings, figure 21
overpage displays the 24hr mode.
22
Hide quick links:
Advertisement
Table of Contents
