Hp Trusted Platform Module - HP ProLiant DL160 Gen9 Maintenance And Service Manual

Disconnect all power supply cables from the system board and any associated component (drive
8.
backplane, GPU, etc.).
Remove the non-hot-plug power supply.
9.
To replace the component, reverse the removal procedure.

HP Trusted Platform Module

The TPM is not a customer-removable part.
CAUTION:
the TPM security rivet. Upon locating a broken or disfigured rivet on an installed TPM,
administrators should consider the system compromised and take appropriate measures to ensure
the integrity of the system data.
If you suspect a TPM board failure, leave the TPM installed and remove the system board. Contact an HP
authorized service provider for a replacement system board and TPM board.
Any attempt to remove an installed TPM from the system board breaks or disfigures
Removal and replacement procedures 63