Dimm Slot Locations; System Maintenance Switch - HP ProLiant DL160 Gen9 Maintenance And Service Manual

Item
28
29
* For more information on the riser board slots supported by the onboard PCI riser connectors, see "PCIe riser
board slot definitions (on page 75)."

DIMM slot locations

DIMM slots are numbered sequentially (1 through 8) for each processor. The supported AMP modes use the
letter assignments for population guidelines.

System maintenance switch

Position
S1
S2
S3
S4
S5
S6
S7
S8
S9
S10
Description
System maintenance switch
FlexibleLOM sideband signal connector
Default Function
Off Off = iLO security is enabled.
On = iLO security is disabled.
Off Off = System configuration can be
changed.
On = System configuration is locked.
Off Reserved
Off Reserved
Off Off = Power-on password is enabled.
On = Power-on password is disabled.
Off Off = No function.
On = ROM reads system configuration
as invalid.
Off Off = Set default boot mode to UEFI.
On = Set default boot mode to legacy.
— Reserved
— Reserved
— Reserved
Component identification 77