Optical Drive - HP ProLiant DL160 Gen9 Maintenance And Service Manual

Disconnect the cache module backup power cable from the cache module.
5.
Remove the cache module.
6.
To replace the component, reverse the removal procedure.

Optical drive

CAUTION:
all bays are populated with a component or a blank.
To remove the component:
Power down the server (on page 26).
1.
Remove all power:
2.
Disconnect each power cord from the power source.
a.
Disconnect each power cord from the server.
b.
Do one of the following:
3.
Extend the server from the rack (on page 28).
o
To prevent improper cooling and thermal damage, do not operate the chassis unless
Removal and replacement procedures 36