Diagnostics Menu; Entering Diagnostics Menu; Available Tests - Lexmark X46x series Service Manual

Diagnostics menu

Entering Diagnostics menu

1.
Turn off the printer.
2.
Press and hold 3 and 6.
3.
Turn on the printer.
4.
Release the buttons after ten seconds.

Available tests

The tests display on the operator panel in the order shown:
Registration
Print tests
Hardware tests
Duplex tests
Input Tray Tests
Output Bin Tests
Base Sensor Test
Device Tests
Printer setup
EP Setup
Reports
Event Log
Scanner Tests
Exit Diagnostics
Note: Menus may vary depending on the features and options of the printer.
See "Registration (printer)" on page
See "Print Tests" on page
See "Hardware Tests" on page
See "Duplex Tests" on page
See "Input Tray Tests" on page
See "Output bin tests" on page
See "Base Sensor Test" on page
See "DEVICE TESTS" on page 3-28
See "PRINTER SETUP" on page
See "EP SETUP" on page
See "Reports" on page 3-32.
See "Reports" on page 3-32.
See "Scanner Tests" on page 3-34
See "Exit Diagnostics" on page
3-18.
3-20.
3-21.
3-24.
3-26.
3-27.
3-28.
3-29.
3-31.
3-37.
Diagnostic aids
7014-xxx
3-17