Table of Contents
Advertisement
5.
Adjusting color gradation.
●
To adjust color gradation automatically
Every color gradation (0 to 255) can be displayed by adjusting the signal output level.
Procedure
1. Display Pattern 2 in full screen on the monitor using the "Screen adjustment pattern files".
2. Choose "Screen" from the Adjustment menu, and press
3. Choose "Analog Adjustment" from the "Screen" menu, and press
4. Choose "Range Adjustment" from the "Analog Adjustment" menu, and press
The color gradation is adjusted automatically.
When the auto adjustment is completed, a message appears. Select "OK" to confirm the new settings or "Cancel" to
restore the precious settings, and press
5. Close Pattern 2.
2-3. Adjusting Color
Attention
• The monitor will take about 30 minutes before its internal electric components stabilize. Wait 30 minutes or more after
turning the monitor power on before starting adjustment.
• The same image may be seen in different colors on multiple monitors due to their monitor-specific characteristics. Make
fine color adjustment visually when matching colors on multiple monitors.
Note
• The values shown in "%" or "K" are available only as reference.
●
To adjust brightness
The screen brightness is adjusted by changing the brightness of the backlight (light source from the LCD back
panel).
Adjustable range
1to100%
0to100%
Procedure
1. Choose "Color" from the Adjustment menu, and press
2. Choose "Brightness" from "Color", and press
3. Use
or
for adjustment.
4. Press
to exit.
Note
• The brightness can be set by directly pressing
.
when"BacklightOffMode"issetto"Off"(page22)
when"BacklightOffMode"issetto"On"(page22)
(Whenthelowerlimitvalue(0%)isset,tthebacklightisturnedofftodarkenthescreen.)
or
.
.
.
.
. (For the setting value, please display and check "Color".)
Chapter2AdjustingScreens
.
15
Advertisement
Table of Contents
