3-4. Setting the EIZO Logo Display
This function allows you to display, or not, the EIZO logo.
Procedure
1. Press
for two seconds or more to turn off the monitor.
2. Holding
down, press
The "Optional Settings" menu appears.
3. Choose "Logo" from "Optional Settings", and press
4. Select "On" or "Off" with
5. Select "Finish" with
6. Press
.
The "Optional Settings" menu is closed.
3-5. Locking Buttons
This function allows you to lock the adjusted/set status to prevent changing them.
Procedure
1. Press
for two seconds or more to turn off the monitor.
2. Holding
down, press
The "Optional Settings" menu appears.
3. Choose "Key Lock" from "Optional Settings", and press
4. Choose "Off", "Menu", or "All" with
Settings
Off
(Defaultsetting)
Menu
All
5. Select "Finish" with
6. Press
.
The "Optional Settings" menu is closed.
3-6. Enabling/Disabling DDC/CI communication
This function allows you to enable/disable the DDC/CI communication (see
Procedure
1. Press
for two seconds or more to turn off the monitor.
2. Holding
down, press
The "Optional Settings" menu appears.
3. Choose "DDC/CI" from "Optional Settings", and press
4. Select "On" or "Off" with
5. Select "Finish" with
6. Press
.
The "Optional Settings" menu is closed.
for at least two seconds to turn on the monitor.
or
, and press
or
.
for at least two seconds to turn on the monitor.
or
, and press
Buttons that can be locked
None(Allbuttonsareenabled)
button
Allbuttonsexcluding
or
.
for at least two seconds to turn on the monitor.
or
, and press
or
.
.
.
.
.
"6-4. Glossary" (page
.
.
36)).
Chapter3SettingMonitor
21