●
To switch among input signals
Procedure
1. Choose "Tools" from the Adjustment menu, and press
2. Choose "Input" from "Tools", and press
3. Select "D-SUB" or "DVI" with
4. Press
to exit.
When the signal is switched, the active input port name appears at the top right corner of the screen.
●
To set input signal selection
Setting
Auto
Manual
Procedure
1. Choose "Tools" from the Adjustment menu, and press
2. Choose "Input Selection" from "Tools", and press
3. Select "Auto" or "Manual" with
4. Press
to exit.
Note
• When "Auto" is selected for "Input Selection", the monitor's power saving function works only when all PCs are in the
power saving mode.
30
Chapter6Reference
or
.
ThemonitorrecognizestheconnectorthroughwhichPCsignalsareinput.
WhenaPCisturnedofforentersthepowersavingmode,themonitorautomatically
displaysanothersignal.
ThemonitordetectsonlythePC'ssignalscurrentlydisplayingautomatically.Selectan
activeinputsignalintheAdjustmentmenu.
or
.
.
.
Function
.
.