Table of Contents
Advertisement
Assigning EDID
To assign EDID to selected inputs:
1.
From the inputs group box (table of inputs) on the right, select the check boxes for the
desired inputs (see
figure
2.
From the
,
Favorites
Connected Outputs
left, select the desired EDID.
3.
From the inputs group box, click the
input or inputs.
To assign EDID to all inputs:
1.
From the
,
Favorites
Connected Outputs
an EDID.
2.
From the inputs group box, click the
NOTE: Checked or unchecked inputs are ignored and the EDID is assigned to all
inputs.
To match the selected inputs to the current output resolution:
Matching the output resolution is the default value for all inputs.
1.
From the inputs group box (table of inputs) on the right, select the check boxes for the
desired inputs (
).
8
2.
In the
Output Resolution
Adding EDID to the EDID Library
1.
Click the
Add EDID to Library
opens.
2.
Navigate to the desired EDID file location and select it.
NOTE: Valid EDID files have a .bin file extension.
3.
Click the
button. The EDID is added to the
Open
Saving EDID to the EDID Library
1.
From the
or
Favorites
2.
Select
Save to EDID Library
3.
Click the
button to save the file.
OK
NOTE: Saving a factory scaler EDID exports an HDMI, LPCM-2Ch EDID to the PC. The
file is saved as a .bin file.
IN1604 DTP and IN1604 HD Scalers • Configuration Software
45,
on page 63).
8
, or
Available EDID
button (
Assign
, or
Available EDID
Assign to All
panel, click the
Match Output
button (
). The
=
Add EDID to Library
Available EDID
pane (
Connected Outputs
.
pane (
-
) on the
4
6
) to assign EDID to the selected
9
pane (
-
), select
4
6
button (
).
-
button (
).
7
window
pane (
).
6
-
), right-click on an EDID.
4
5
64
Advertisement
Chapters
Table of Contents
