Extron electronics IN1604 DT User Manual page 22

To navigate the OSD menu:
1.
Submenus
Quick Setup Auto-Image
User Presets Recall
Picture Controls Image
Position
Input
Auto-Image
Output Output
Resolution
Audio Audio Mute
Advanced Test Pattern
Communication Remote Port
Device Info Temperature
(Read Only)
2.
3.
4.
To adjust a submenu item:
1.
2.
3.
To exit the OSD menu:
Hold the
Press the or button to navigate the nine submenus. The following table shows
Up Down
the nine submenus and their respective submenu items.
Input Format EDID
Save Clear
Image Size Brightness/
Contrast
Input Format Film Mode
HDMI Format HDCP
Notification
Audio Format Analog Gain/
Attenuation
Screen Auto-Image
Saver/
Timeout
Contact
Mute/
Tally LED
Input Output
Information Information
Press the or button to open submenu items.
Enter Right
Press the or button to navigate the submenu items.
Up Down
Press the button to exit a submenu item or return to the previous submenu.
Menu
Navigate to an adjustable item and press the
submenu item.
Press the or button to select a submenu item or a specific adjustable
Left Right
setting within the selected submenu item.
If the selected submenu item has multiple adjustable settings, press the
button to select a value.
Press the button to accept the new value.
Enter
Press the button to cancel any pending changes.
Menu
button for 3 seconds to exit the OSD menu.
Menu
Submenu Items
Audio Output Aspect Ratio
Resolution
Color/Tint Detail
Horizontal/ Horizontal/ Total Pixels/
Vertical Start Vertical
Active
Output Output
Format Volume
Aspect Ratio Auto Memory
HDCP Status Display
Information
or
Enter
IN1604 DTP and IN1604 HD Scalers • Operation
Audio Mute Test Pattern
HDCP
Phase Authorization
Overscan Auto Switch Factory
Firmware
Version
button to select the
Right
or
Up Down
EDID
Reset
16