Silencing Alarms - Bosch 2212 User Manual

Silencing Alarms

When there is an alarm, the alarm tone sounds and the point or points
in alarm are shown in the display. If you enter your passcode before the
system dials your security company, the alarm is canceled.
1. The point in alarm is shown on the display:
ALARM PT 8
MOTION DETECTOR
ENTER CODE TO
TURN SYSTEM OFF
2. Enter your passcode to silence the alarm and turn the system off
(if it was turned on). If you enter your passcode before the
system dials your alarm company, the alarm is canceled. If not,
an alarm report is sent to your alarm company. To determine
whether the alarm was reported, follow the procedure to View
Alarm Memory. The display continues to show the point or
points that caused the alarm:
ALARM PT 8
MOTION DETECTOR
TO REMOVE ALARMS
PRESS [CLEAR]
3. Press [CLEAR] to remove the alarm messages from the display.
4. Use Viewing Alarm Memory to review the points that caused the
alarm. Use Resetting the System to reset system points.
9