Changing Passcodes - Bosch 2212 User Manual

Changing Passcodes

I have this feature.
I do not have this feature.
This feature lets you change your personal passcode at any time,
without assistance from your alarm company. It is recommended that
you write down your old and new passcodes before you begin.
1. Make sure that your system is off (On light is off).
2. Press [5]. The OK tone sounds and the display changes to:
ENTER OLD CODE
3. Enter your current passcode. The display shows:
ENTER CODE
4. If the passcode you've entered is valid, you are prompted to
enter your new passcode:
ENTER NEW CODE
5. Enter a new passcode with the same number of digits as your
old passcode. If the error tone emits, try a different passcode.
ENTER CODE
6. If you've entered a valid new passcode, the display changes to:
ENTER NEW AGAIN
7. Enter your new passcode again. The display shows:
ENTER CODE
8. The following display confirms the change, and the Change
Passcode mode is turned off. If the error tone sounds, start over:
CODE CHANGED
23