Bosch 2212 User Manual page 41

SYSTEM TROUBLE
TAMPER PT ##
[point text]
TESTING BATTERY
MAY TAKE 4 MIN.
TESTING BELL
TESTING PHONE
MAY TAKE 10 MIN.
TIMED OUT
TO BYPASS POINTS
PRESS
TO CLEAR ALARM
MEMORY
TO END
PRESS [CLEAR]
TO EXIT
PRESS [CLEAR]
TO REMOVE ALARMS
PRESS [CLEAR]
TO STOP
PRESS [CLEAR]
TROUBLE PT ##
[point text]
WATCH TONE IS
OFF
WATCH TONE IS
SHORT BEEP
WATCH TONE IS
BEEP till key
WATCH TONE IS
BEEP till closed
Indicates there is a system trouble
condition.
Indicates a point was tampered with.
Indicates the battery test is in
progress.
Indicates the bell test is in progress.
Indicates the phone test is in process.
Indicates system was expecting a key
to be pressed, but did not receive it.
Prompt to press [ ] to bypass
points.
Instructions to follow regarding
clearing alarm memory.
Prompt to press [CLEAR] to end the
Step Outside feature.
Prompt to press [CLEAR] to exit
current function.
Press the [CLEAR] to remove alarm
messages from the display.
Prompt to press [CLEAR] to stop exit
delay and return system to off state.
Indicates point trouble. Call your
alarm company for service.
Indicates the watch tone is turned
off.
Indicates the watch tone is currently
set to produce a short beep when a
point is faulted.
Indicates the watch tone is currently
set to beep until a key is pressed.
Indicates the watch tone is currently
set to beep until the point is returned
to normal.
41