Password Protection - Brady BBP 33 User Manual

Password Protection

Enable Protection
®
33 Sign & Label Printer User's Manual
BBP
Use this procedure to enable password protection or to change a password.
Passwords can be enabled for the Output Settings or Printer Settings menus.
To enable password protection:
1. Press to go to the navigation menu.
2. Press or to scroll to Tools, then press
3. Press to scroll to Password, then press
4. At the prompt, enter the password by using a combination of arrow keys and
buttons, then press
Note: The default password is DULR (down, up, left right).
5. Press to accept Enable Protection.
6. Press or to select either Off or On, then press
7. When done, press
.
repeatedly to exit to the main menu.
Tools
Password Protection
.
.
.
-
3 13