Using the
key (key with double arrows), select the
5.
Tab
Stylus Properties Calibration Tab Window
Figure 3-31
Using the
key, select the
6.
Tab
Press the space key to start the calibration process. The calibration screen appears.
7.
Calibration Screen
Figure 3-32
As the screen instructs, carefully touch and briefly hold on the center of each target that appears on the screen.
8.
Repeat as the target moves around the screen.
Tap the screen to accept the new calibration.
9.
As the screen instructs, carefully touch and briefly hold on the center of each target that appears. Repeat as
10.
the target moves around the screen.
Tap the screen to accept the new calibration.
11.
Calibration
button.
Recalibrate
Operating the VC70 3 - 27
tab.