Tap
until you return to
10.
Back
From the
screen, tap
11.
Profile0
Keep tapping
12.
Back, Exit
On the DataWedge main screen, tap
Ready to Capture Window
Figure 4-55
Aim the scanner at a bar code and press the scan trigger. The bar code data appears in the DataWedge
13.
Demonstration window.
DataWedge Demonstration Window
Figure 4-56
screen
Profile0
.
Input > Scanner > Bluetooth SSI Scanner > Driver > Enabled.
and
to return to DataWedge main screen.
OK
to show
Running
DataWedge Scanner Connection 4 - 27
and verify that
Yes
Status: Ready
.