5 - 40 VC70 Vehicle Computer Product Reference Guide
Tap
.
16.
Save
NOTE If re-editing is required, tap Options > Configure > Host Profiles and enter default password: "system".
tap OK to continue.
Tap
17.
Options > Connect Session 1
connected to the host system. The bar code data will show on the black screen. The bar code data will show
on the black screen.
Load 7.3.146 or greater of the Wavelink Emulation Software for the VC70N0 to your PC.
18.
Make the following Emulation Parameter Changes:
19.
Wavelink Emulation Software
Figure 5-49
On the Edit Host Profile box, verify the Alias name and tap
and scan a bar code to scan a bar code to verify that the scanner is properly
.
Done