Motorola VC70N0 Product Reference Manual page 46

Numeric Keyboard
Installing the Numeric Keyboard on the Mount
Figure 2-24
Attach the numeric keyboard mount to the VC70, using four M5x14mm torx head screws with captive
3.
washers.Tighten the screws.
Torque the numeric keyboard torx head screws to 20 + 10% kgf-cm (17 + 10% lbs-in).
4.
Numeric Keyboard Connector
Numeric Keyboard
Installing the Mount on the VC70
Figure 2-25
Connect the numeric keyboard to a free USB connector. Fasten the screws using a flat head screw driver.
5.
4 Torx Head Screws with
Captive Washers
Numeric Keyboard Mount
6 Torx Head Screws with captive washers
Installation 2 - 23