U Mount Installation
The U Mount (P/N: KT-U-MOUNT-VC70-R) for is used for replacing a mounted VC5090 with the VC70.
Mounting Bracket Installation
Figure 2-8
To install the U-mount:
Position the friction pads in the friction pad mounting area.
1.
Position the U-mount over the mounting holes.
2.
Place lock and flat washers onto cap screws.
3.
Screw the M12x40mm hex head screws into mounting holes and tighten. Torque the hex head screws 350 ±
4.
10% kgf-cm (300 ± 10% lbs-in).
Installation 2 - 11
U Mount
Lock Washer
Hex Head Screw
Flat Washer
Friction Pad
Friction Pad Mounting Area