Motorola VC70N0 Product Reference Manual page 104

4 - 18 VC70 Vehicle Computer Product Reference Guide
From the
12. Profile0
Keep tapping
13.
On the DataWedge main screen, tap
Ready to Capture Window
Figure 4-38
Aim the scanner at a bar code and press the scan trigger. The bar code data appears in the DataWedge
14.
Demonstration window.
DataWedge Demonstration Window
Figure 4-39
To pair the scanner with your VC70, scan the pair label bar code on the upper right side of the VC70. The
15.
scanner beeps indicating that it is successfully connected to the VC70.
screen, tap
Input > Serial > COM9: > Enabled.
and to return to DataWedge main screen.
Back, Exit OK
Running
to show and verify that
Yes
.
Status: Ready