Installing The Dc Power Supply (Psu) On The Vc70 - Motorola VC70N0 Product Reference Manual

Installing the DC Power Supply (PSU) on the VC70

NOTE Follow this procedure when using the U-mount. The PSU fastening screws are supplied with the U-mount kit.
Attach the PSU to the back of the vehicle computer.
5.
Screw the four M5x14mm screws into the PSU mounting holes and tighten. Torque the screws 20 ± 10%
6.
kgf-cm (17 ± 10% lbs-in).
Installing the PSU
Figure 2-5
NOTE Whenever the PSU needs to be mounted remotely, refer to
mounting solution. You need to also use an extender cable PN 25-159549-01 to connect the PSU to the
vehicle computer. For power supply and cables, refer to
Vehicle Computer
PSU
Fastening Screws
Installing the PSU on page 2-9
Accessories on page 1-4.
Installation 2 - 9
to prepare the