Setting The Internet Parameters; Basic Parameters - Panasonic DP-8020P Operating Instructions Manual

Basic Parameters

Following Six (6) Basic Parameters must be
pre-programmed into the machine.
*• TCP/IP Address of your machine
*• TCP/IP Subnet Mask of your machine
*• TCP/IP Address of the Default Gateway
*• TCP/IP Address of the DNS Server
• Email Address of your machine
• Name or IP Address of the Default
SMTP Mail Server
(*These parameters are in the General
Settings. Refer to the Operating
Instructions (For Copy & Network Scan
Functions).)
User Parameters (Internet Parameters)
Parameter
1 DATE & TIME
2 LOGO
3 CHARACTER ID
4 ID NO.
5 TIME ZONE
6* EMAIL ADDRESS
7* SMTP SERVER NAME
8* SMTP SERVER IP
9* SMTP AUTH NAME
10* SMTP AUTH PASSWORD The SMTP Authorized Password. (Up to 10 characters)
11* POP SERVER NAME
12* POP SERVER IP
13* POP USER NAME
14* POP PASSWORD
15* LDAP SERVER NAME
NOTE
56
Internet Fax Features

Setting the Internet Parameters

1
Current Date and Time.
Up to 25 characters & digits.
Up to 16 characters & digits.
Your Fax Telephone Number. (Up to 20 digits)
The Time Zone is required as part of the Email header information when sending
Internet faxes.
The Email Address assigned to your machine for sending and receiving.
(Up to 60 characters)
The name of the SMTP Mail Server. (Up to 60 characters)
IP Address of the SMTP Mail Server. (Available when DNS Server address setting is
"INVALID".)
The SMTP Authorized Name. (Up to 40 characters)
(Available when Fax Parameter No. 170 "SMTP AUTHENTICATION" is "Valid")
(Available when Fax Parameter No. 170 "SMTP AUTHENTICATION" is "Valid")
The name of the POP Mail Server. (Up to 60 characters)
IP Address of the POP Mail Server. (Available when DNS Server address setting is
"INVALID".)
User Name assigned to your machine. (Up to 40 characters)
Password assigned to your machine. (Up to 10 characters)
The name of the LDAP Server. (Up to 60 characters, Ex: ldap.company.com)
(Available for some countries only.)
1. These setting is required only when "23 DNS Server Address" in General setting is set to
"Valid". When the setting is "Invalid", set each IP address, refer to For Key Operator in the
Operating Instructions (For Copy and Function Parameters) on the provided CD-ROM,\.
2
If set on other
function mode.
Comments