General Description
The Access Code prevents an unauthorized user from operating the machine. Once a 4-digit Access Code
is registered, no one can operate the machine without entering the correct access code.
Automatic Receiving, however, is always available. After you complete any operation, such as mode setting
or transmission, and the display returns to standby, you have to re-enter the access code in order to use the machine
again. Registering the Access Code does not affect the use of the machine in any other way.
Setting the Access Code
1
If set on other
function mode.
Operating FAX/EMAIL with the Access Code
1
If set on other
function mode.
NOTE
154
Setting Your Machine
Access Code
2
1. To erase the Access Code, enter the Access Code and press
procedure above to Step 3, then press
Restrict all Operatings
2a
dd-MMM-yyyy 15:00
ACCESS CODE=
4-digit Access Code
Ex: 1234
Restrict the Operation of Setting/Printing the Fax
2b
Parameters Only
(Ex: When setting the Fax Parameter.)
,
CLEAR
3
FAX PARAMETER(1-182)
NO.=
and follow the
SET
and
.
SET
STOP