Panasonic DP-8020P Operating Instructions Manual page 150

No.
052
053 SUB-ADDRESS
054 FAX FORWARD
056 COVER SHEET
064 CHANGE KEYBOARD
077 DEPARTMENT CODE
078 ROTATION XMT
082 QUICK MEMORY XMT
095 DUPLEX PRINT
097 SPECIAL TRAY
099 MEMORY SIZE
(Flash Memory)
118 FAX FUNCTION
120 sFINE RESOLUTION
133
150
Setting Your Machine
Fax Parameters
Setting
Parameter
Number
DIAGNOSTIC
PASSWORD
PASSWORD
(HOME)
No.1 - 3
DETECT
JOB BUILD *1
Setting
(----) Setting the password for Remote Diagnostic Mode. Please
ask your Panasonic Authorized Dealer for details.
(----) Setting a 20-digit password for secured sub-address
communication.
1 Invalid Selecting whether the machine performs Fax Forwarding to
the specified destination.
2 Valid
1 Off Setting the home position of the Cover Sheet parameter in
the Select Mode. (See page 86)
2 On
1 QWERTY Selects the Keyboard Type when the One-Touch Sheet is
changed on the Keyboard. (It is available when the optional
2 QWERTZ
Keyboard (DA-KB180) is installed.)
3 AZERTY
1 Invalid Selecting whether the machine performs the Department
Code operation.
2 Valid
1 Invalid Selecting whether the machine performs rotation
transmission.
2 Valid
1 Invalid Selecting whether the machine performs Quick Memory
Transmission.
2 Valid
Invalid
Valid
1 Invalid Selecting whether the machine performs duplex print when
receiving the document via G3 Fax or Internet Fax.
2 Valid
1 None Select a Special Tray that will not be used for printing
received faxes (Tray 1 - 4). One Tray must always be
2 Tray 1
available for receiving Faxes.
3 Tray 2
(You can specify one Tray (1 - 4) for each selection No.1, 2
and/or 3.)
4 Tray 3
5 Tray 4
- - Displays the amount of base and optional memory installed.
(Base Memory + Optional Memory)
1 Invalid Setting the number of digits required to determine the
entered number is a Fax Telephone number.
2 4-Digits
Upon detecting the specified number of digits, the machine
3 5-Digits
will automatically switch to the FAX Mode when it is in the
Copier Mode.
4 6-Digits
5 7-Digits
6 8-Digits
1 400 dpi Selecting the S-Fine default Resolution.
2 600 dpi
Off Selecting whether the machine performs Job Build when
the total number of documents exceed the maximum
2 On
capacity of the ADF, or when scanning the documents
manually one at a time. (See page 112) (The Quick Memory
Transmission feature (Fax Parameter No. 082) is not
available when the Job Build is set to "2: On". )
Comments
: Stores all documents into memory first before
dialling the telephone number.
: Starts dialling the telephone number immediately
after storing the first page.