Cordless Module Led Indicators; Using The Mute Key On A Cordless Device; Using The Volume Keys On Cordless Device; Using The Mitel Cordless Handset - Mitel 5320e User And Administrator Manual

5320e/5330e/5340e IP Phone SIP User and Administrator Guide

Cordless Module LED Indicators

The Cordless Module has a blue light-emitting diode (LED) that indicates the current status of the
module:
Blue LED
Solid
Blinking
Off
Solid for several seconds
Blinking: LED is On and Off for equal amount of time

Using the Mute Key on a Cordless Device

When using a Mitel-branded cordless accessory, the Mute key on the cordless accessory is
synchronized with the Mute key on your phone. Pressing the Mute key on either the phone or the
accessory also controls the Mute function on the other device.
There is no synchronization between a third-party Bluetooth headset mute control (if one is
available) and your phone Mute key. The procedure for muting a Bluetooth headset depends on
the headset manufacturer. Some headsets have a mute control and some do not. You can,
however, use the Mute key on your phone to mute a conversation on any type of Bluetooth
headset.

Using the Volume Keys on Cordless Device

When using a Mitel-branded cordless accessory, the Volume keys on the cordless accessory are
synchronized with the Volume keys on your phone. Pressing the Volume keys on either the
phone or the accessory also controls the Volume function on the other device.
When using a third-party Bluetooth headset, the volume control on the headset (if one is
available) is not synchronized with the Volume keys on your phone. Pressing the Volume keys on
the phone does not change the headset volume.

Using the Mitel Cordless Handset

The cordless handset provides office mobility, allowing you to make and answer calls while away
from your desk. Replacing the standard corded handset, the cordless handset contains a
rechargeable battery that charges in the handset cradle when not in use.
To use the cordless handset (whether DECT or Bluetooth), you must pair the handset with the
phone. For details, see
Audio is active between the module and either the handset or headset.
Pairing mode is active or a firmware upgrade is in progress.
No audio is active.
Pairing is successful.
Pairing the Cordless Module and Accessories
- 47 -
Function
on page 44.