Manual Intercom; Dial Intercom; Dial By Name Using System Speed Dialing - NEC DT300 Series User Manual

Manual Intercom

To Initiate:
Lift handset or press Speaker key, press MICM key,
ring back tone is heard.
Called party
ICM
4:26 PM TUE 12 FEB 2008
Each press of MICM key sends tone bursts.
To Answer:
MICM key flashes, indicating an incoming call. Ring tone
may also be heard.
Calling party
ICM
4:26 PM TUE 12 FEB 2008
Press MICM key.
Lift handset or press Speaker key, LED lights solid
green.
If called station is engaged in a non-intercom call, the
station may press MICM key after placing original
caller on hold (with Hold key).
2000
2001

Dial Intercom

To Initiate:
Lift handset or press Speaker key.
Press DICM key.
Dial desired intercom station number (0-9). Tone
burst is sent. (Press 1 to change to ring tone signal.
To Answer:
DICM LED flashes, indicating an incoming intercom
call. Tone burst or ring tone is heard.
Press DICM key.
Lift handset or press Speaker. LCD shows solid
green.

Dial By Name Using System Speed Dialing

To Initiate:
Press the SYS soft key.
Enter up to the first four characters of a name using
the keypad.
Press the UP or DOWN key to start the search.
The name and the number are shown on the LCD. If
more than one name matches the letters entered,
scroll through the matches with the UP or DOWN soft
key.
If no matches are founds, the first System Speed Dial
buffer will be displayed.
Press the Speaker key, or selecting a Line/Trunk key
to dial the selected number.
32