Manual Intercom - NEC DT830 Series User Manual

To Bridge Into An Automatic Intercom Call
Note: Bridging is an optional feature.
STEP 1: Press the AICM key, lift the handset or press
Speaker
key.
OVERRIDE
1:25 PM
STEP 2: A three-party conference is established.
CONF
1:25 PM
Overriding party
1
MON 11 MAY 2015
MON 11 MAY 2015

MANUAL INTERCOM

DT830 DT430/410
To Initiate
STEP 1: Press the MICM key, lift the handset or press
Speaker
key, a ringback tone is heard.
STEP 2: Press the SIG key if it is desired for the called
station to hear ringing.
ICM
1:25 PM
To Answer
STEP 1: The MICM key flashes, indicating an incom-
ing call. A ring tone may also be heard.
ICM
1:25 PM
STEP 2: Press the MICM key.
STEP 3: Lift the handset or press
lights solid green.
Note: When the called station is engaged with a non-
intercom call, the called station user presses the
MICM key to answer the incoming call after plac-
ing the non-intercom caller on hold (with
key).
135
Called party
2
MON 11 MAY 2015
Calling party
1
MON 11 MAY 2015
Speaker key, the LED
HOLD