Configuring Agent Settings - Toshiba GL-1010 Administrator's Manual

4 Scroll down to the bottom of the page.
5 Under the
pull-down list box.
6 Select
printing.
7 Click
Alternatively, click
their previous values.

Configuring Agent Settings

The controller uses various utilities, known as transfer agents, to send
faxes and scanned files to different output destinations. The
administrator sets up these agents initially but, in most cases, you supply
additional information when you send a file.
As the administrator, you determine if the users can edit or create fax/
scan templates by requiring the administrator password to access these
functions. To protect fax/scan template creation and editing:
1 Log in as an administrator.
2 Click the Administration tab.
3 Click the Setup subtab.
4 Click the
5 In the
down list, select
6 Click
Configuring the Send to File Agent
The Send to File agent stores the scanned file on the controller or a file
server.
1 Log in as an administrator.
2 Click the Administration tab.
3 Click the Setup subtab.
4 Click the
5 Click the
6 Click the
storage path.
128
Raw TCP Printing
to enable raw TCP printing or
Enable
to save your settings.
Save
Reset
link.
Scan Agents
Require Administrator password to create or edit scan templates?
Disable
to save the setting.
OK
link.
Scan Agents
link.
Send to File
Disable access to GL_Share
area, click the down arrow beside the
to reset all of the settings on this page to
or .
Enable
check box to prevent access to the
GL-10x0
to disable raw TCP
Disable
Administrator's Guide
Service
pull-