Led Indicators; Corrupt Controller Software - Toshiba GL-1010 Administrator's Manual

LED Indicators

When the
Printer/Network mode.

Corrupt Controller Software

Controller Operating System Corrupt
Problem Description
The controller operating system has failed to start or has malfunctioned.
Corrective Action
Use the e-STUDIO Recovery CD-ROM to restore the required controller
system files. Refer to the field service guide for instructions.
OS Update Does Not Boot Off CD
Problem Description
During an OS update from CD-ROM, the OS Update Version screen fails
to appear or the LCD touch screen displays the Starting Controller,
Please Wait or Shut-down in Progress, Please Wait message for
over ten minutes. The CD-ROM may be damaged or incorrectly inserted.
Other possible reasons are more serious and may require contacting your
TOSHIBA authorized dealer for support.
Corrective Action
1 Make sure that the CD-ROM has been inserted into the drive with the
label side up (showing).
2 Check that you can read the CD-ROM from another drive. If the CD-
ROM is corrupt or damaged, contact your TOSHIBA authorized dealer
for support.
324
Copier Control Panel
PRINTER/NETWORK
LED is on, it indicates that the copier is in
GL-10x0 Administrator's Guide