•
Check tray length and width guides and make sure the paper is properly loaded in the tray.
•
Check the Print Properties settings to make sure the print job is requesting the correct paper size and type.
•
Check that the paper size is correctly set. For example, if the MP Feeder Size is set to Universal, make sure the
paper is large enough for the data being printed.
•
Cancel the current print job.
35 Insufficient memory to support Resource Save feature
The printer lacks sufficient memory to save settings. Install additional memory, or press
and continue printing.
37 Insufficient memory for Flash Memory Defragment operation
Try one or more of the following:
•
Press the arrow buttons until Continue appears, and then press
continue printing.
•
Delete fonts, macros, and other data in printer memory.
•
Install additional printer memory.
37 Insufficient memory to collate job
Try one or more of the following:
•
Press the arrow buttons until Continue appears, and then press
and begin collating the rest of the print job.
•
Cancel the current print job.
38 Memory full
Try one or more of the following:
•
Press the arrow buttons until Continue appears, and then press
•
Cancel the current print job.
•
Install additional printer memory.
39 Complex page, some data may not have printed
Try one or more of the following:
•
Press the arrow buttons until Continue appears, and then press
•
Cancel the current print job.
•
Install additional printer memory.
Understanding printer messages
92
to disable Resource Save
to stop the defragment operation and
to print the portion of the job already stored
to clear the message.
to clear the message and continue printing.