Lexmark E360d Series User Manual page 20
Lexmark printer user's guide
Hide thumbs
Also See for E360d Series:
- Service manual (180 pages) ,
- User manual (144 pages) ,
- Brochure & specs (4 pages)
Table of Contents
Advertisement
2
Unpack the card.
Note: Avoid touching the connection points along the edge of the card.
3
Holding the card by its sides, align the card with the connector on the system board.
4
Push the card firmly into place.
Notes:
•
The entire length of the connector on the card must touch and be flush against the system board.
•
Be careful not to damage the connectors.
5
Close the system board door.
Additional printer setup
20
Advertisement
Table of Contents
