Conserving Supplies; Checking The Status Of Supplies From A Network Computer - Lexmark E360d Series User Manual

Conserving supplies

Conserving supplies using the printer control panel
There are some settings you can change from the printer control panel that will help you conserve toner and paper.
For more information, see the following table:
Supply
Toner
Paper or specialty media
Conserving supplies when printing multiple copies
If you need to print several copies, you can conserve supplies by printing the first copy and checking it for accuracy
before printing the remaining copies.
Checking the status of supplies from a network
computer
Note: The computer must be connected to the same network as the printer.
1
Type the printer IP address into the address field of your Web browser.
Note: If you do not know the IP address of the printer, print a network setup page and locate the IP address in
the TCP/IP section.
2
Click Device Status. The Device Status page appears, displaying a summary of supply levels.
Path to menu item
Settings Quality Menu
Toner Darkness
Settings Finishing Menu
N-up
Settings Finishing Menu
Sides (Duplex)
Maintaining the printer
98
Purpose of menu item
Lets you adjust the level of toner
released on a sheet of paper or specialty
media. The values range from 1 (lightest
setting) to 10 (darkest setting), with 8
being the factory default setting.
Lets you select to print two or more
page images on one side of a sheet.
Values for N-up are 2-Up, 3-Up, 4-Up, 6-
Up, 9-Up, 12-Up, and 16-Up.
Lets you print on both sides of a sheet
of paper