Using The Embedded Web Server; Viewing Reports - Lexmark E360d Series User Manual

Using the Embedded Web Server

If the printer is installed on a network, the Embedded Web Server is available for a range of functions including:
•
Viewing a virtual display of the printer control panel
•
Checking the status of the printer supplies
•
Configuring printer settings
•
Configuring network settings
•

Viewing reports

To access the Embedded Web Server, type the printer IP address into the address field of your Web browser.
Notes:
•
If you do not know the IP address of the printer, then print a network setup page and locate the IP address in
the TCP/IP section.
•
For more information, see the Networking Guide on the Software and Documentation CD and the Embedded Web
Server Administrator's Guide on the Lexmark
Viewing reports
You can view some reports from the Embedded Web Server. These reports are useful for assessing the status of the
printer, the network, and supplies. To view reports from a network printer:
1
Type the printer IP address into the address field of your Web browser.
Note: If you do not know the IP address of the printer, then print a network setup page and locate the IP address
in the TCP/IP section.
2
Click Reports.
The following reports may be viewed from the Embedded Web Server:
Reports
Device Statistics
Device Settings
Device Information
Profiles List
Printer Server Setup Page
TM
Web site at www.lexmark.com.
Administrative support
107