5. Advanced Installation and Adjustment
This chapter describes installation and adjustment procedure for X
series industrial printers. It's recommended to be carried out by
technicians, in order to keep overall printing performance.
Print Head Pressure
Printing quality can be fine adjusted based on which area on the
label the printing quality discrepancy is located.
A. Right Hand Side Enhancement
If the phenomena as shown in Fig. 1 been observed, please turn
the Fine Adjustment Knob clockwise slightly then try printing again
to justify the printing quality improvement as shown in Fig.2. Repeat
the same process until the printing quality is well balanced on both
ends of the label.
Figure 1
Figure 2
76