Argox X-1000VL User Manual page 45

GATEWAY
yyyy-yyyy-yyyy
MAC
ADDRESS
To have more information on Ethernet settings, please refer to
Ethernet User's Guide.
DHCP setting is disabled. On the
contrary, DHCP setting is enabled.
1.
FEED/CONFIG. :
change contents.
(ex. from 000.000.000.000 to
255.255.255.255)
2.
PAUSE/CALIBR. :
shift "_"sign position.
(ex. from 255.255.255.255 to
255.255.255.255)
3.
CANCEL/RESET.:
Select next function setting. ("_"
sign must at the third digit of each
parameter, for example, xxx).
4.
To change IP ADDRESS or
SUBNET MASK, enter DEFAULT
GATEWAY setting, press CANCEL
button once; LCD will prompt
"ETHERNET CARD UPDATE
FINISH..."
Then reboot the printer.
(yyyy = 0000~FFFF)
45