Loading Ribbon - Argox X-1000VL User Manual

Loading Ribbon

Note: Thermal Transfer printing requires media to print with
appropriate ribbon. This section can be referred to, for X-Series
to use transfer thermal printing. The sample steps below are
based on ribbon wound ink-side in as an example.(X series
printers use ribbon wound ink-side in as default. To change
setting to ribbon would ink-side out, refer to Section - Switching
Ribbon Wound Ink-side out or Ink-side in)
1. Lift the top cover and front access door to expose the
media compartment. (Figure 1)
1
2. Turn the head latch counter-clockwise and open the
bracket. (Figure 2)
13