Lexmark C762 User Manual page 90

Message
82 Waste Bottle Nearly
Full
82 Waste Toner Bottle
Full
82 Waste Toner Bottle
Missing
83 ITU Maintenance
84 Oiler Nearly
Exhausted
84 Replace Oiler
85 ITU Maintenance
86 ITU Maintenance
87 Fuser Missing
88 <color> Toner Low
89 ITU Maintenance
900–999 Service
<message>
What this message means
The toner waste container is almost
full.
The toner waste container is full.
The toner waste container is missing.
The counter that tracks wear on the
image transfer unit has reached its
limit.
The web oiler is nearing the end of its
life.
The web oiler has reached its end of
life or is missing from the printer.
The color adjust sensor LED is too
weak.
The color adjust sensor LED is too
bright.
The fuser is either missing or
incorrectly installed.
The printer has detected that the
specified print cartridge is nearly
exhausted. If you do not have a
replacement cartridge on hand, order
one now. More pages may be printed
before the cartridge is totally
exhausted.
The ITU NVRAM is invalid.
Messages 900–999 relate to printer
problems that may require printer
service.
90
What you can do
• Press Go to clear the message and
continue printing.
• Replace the toner waste container.
See also: 82 Waste Toner Bottle Full
Replace the toner waste container and
press Go to clear the message.
Replace the toner waste container and
press Go to clear the message.
• Press Go to continue printing.
• If print quality is unacceptable, replace
the image transfer unit.
• Press Go to clear the message and
continue printing.
• Replace the web oiler.
See also: Ordering a web oiler
Replace the web oiler.
See also: Ordering a web oiler
• Press Go to continue printing.
• If print quality is unacceptable, replace
the image transfer unit.
• Press Go to continue printing.
• If print quality is unacceptable, replace
the image transfer unit.
Correctly install the fuser to clear the
message and continue printing.
• Replace the specified print cartridge.
• Press Go to clear the message and
continue printing. The Supplies
message is displayed until you replace
the specified print cartridge.
• Press Go to continue printing.
• If print quality is unacceptable, replace
the image transfer unit.
Turn the printer off and check all cable
connections. Turn the printer back on. If the
service message recurs, call for service
and report the message number and
description of the problem.
See also: Calling for service