Lexmark C762 User Manual page 87

Message
39 Complex Page
4<x> Unsupported
Firmware Card
40 <color>
Invalid Refill
50 PPDS Font Error
51 Defective Flash
52 Flash Full
53 Unformatted Flash
54 Serial Option <x>
Error
54 Standard Serial
Error
What this message means
The page may not print correctly
because the print information on the
page is too complex.
The printer detects an unsupported
version of firmware on the installed
firmware card.
The printer has detected an
unsupported refilled cartridge.
The PPDS interpreter has
encountered a font error.
The printer detects defective flash
memory.
There is not enough free space in the
flash memory to store the data you are
trying to download.
The printer detects unformatted flash
memory.
The printer has detected a serial
interface error on a serial port.
87
What you can do
• Press Go to clear the message and
continue printing the job. The job may
not print correctly.
• Press Menu to open the Job Menu and
cancel the current job.
• To avoid this error in the future:
– Reduce the complexity of the page by
reducing the amount of text or
graphics on the page and deleting
unnecessary downloaded fonts or
macros.
– Set Page Protect to On in the Setup
Menu.
– Install additional printer memory.
See also: Setup Menu
• Turn the printer off, and then press and
hold Go while turning it on. The printer
reads the code on the system card and
bypasses the code on the firmware card.
• Remove the firmware card.
See also: Setup Guide
Remove the indicated print cartridge and
install a new one.
• Press Go to clear the message and
continue printing.
• Press Menu to open the Job Menu and
reset the printer or cancel the print job.
Press Go to clear the message and
continue printing. You must install different
flash memory before you can download any
resources to flash.
• Press Go to clear the message and
continue printing. Downloaded fonts and
macros not previously stored in flash
memory are deleted.
• Delete fonts, macros, and other data
stored on the flash memory.
• Install flash memory with more storage
capacity.
• Press Go to clear the message and
continue printing. You must format the
flash memory before you can store any
resources on it.
• If the error message remains, the flash
memory may be defective and require
replacing.
• Make sure the serial link is set up
correctly and you are using the
appropriate cable.
• Press Go to clear the message and
continue printing. The job may not print
correctly.
• Press Menu to open the Job Menu and
reset the printer.