Lexmark C762 User Manual page 112

3
Remove the screw that secures the card to the system board connector slot.
4
Gently pull the card out of the connector.
5
If you saved the metal plate that covers the connector slot and you do not plan to insert another
card, attach the plate:
a
Slide the clip side of the plate in first, making sure the clip end covers the groove on the
system board.
b
Use the screw to secure the other end of the metal plate to the system board.
6
Place the card in its original packaging, or wrap the card in paper and store it in a box.
7
Replace the system board access cover. See Reinstalling the system board access
112
cover.