Lexmark C762 User Manual page 83

Message
Remove Cartridge and
ITU Packaging
Remove Paper
<specified bin>
Resetting Active Bin
Resetting Fuser Cnt
Value
Resetting the Printer
Restore Held Jobs.
Go/Stop?
Restoring Factory
Defaults
Restoring Held Job
xxx/yyy
Restoring Held Jobs
Serial <x>
Setup Required
Press Go
What this message means
The packing material has not been
removed from the cartridges and the
image transfer unit belt.
The specified output bin, or bins, is full. Remove the stack of paper from the
The printer is resetting to the active bin
in a linked set of bins.
The printer is resetting the counter that
tracks wear on the fuser.
The printer is resetting to the current
default settings. Any active print jobs
are canceled.
Someone reset the printer or turned it
on, and the printer detects Print and
Hold jobs stored on the hard disk.
The printer is restoring the factory
default printer settings. When factory
default settings are restored:
• All downloaded resources (fonts,
macros, symbol sets) in the printer
memory are deleted.
• All menu settings return to the
factory default setting except:
– The Display Language setting in
the Setup Menu.
– All settings in the Parallel Menu,
Serial Menu, Network Menu,
USB Menu, and Fax Menu.
The printer is restoring held jobs from
the hard disk.
Note: xxx represents the number of
the job being restored. yyy represents
the total number of jobs to be restored.
The printer is restoring held jobs from
the hard disk.
A serial interface is the active
communication link.
• When you unpacked the printer, you
left a piece of packing material
inside.
83
What you can do
Remove all packing material from inside
the printer.
See also: "Step 5: Installing Supplies" in
the Setup Guide
specified bin(s) to clear the message.
Wait for the message to clear.
Wait for the message to clear.
Wait for the message to clear.
See also: Changing menu settings
• Press Go. All Print and Hold jobs on the
hard disk are restored to printer memory.
• Press Return or Stop. No Print and
Hold jobs are restored to printer
memory. The printer returns to the
Ready state.
See also: Holding a job in the printer
Wait for the message to clear.
See also: Restoring factory default
settings
• Wait for the message to clear.
• Select the Abort Restore menu item in
the Job Menu.
See also: Holding a job in the printer
Wait for the message to clear.
See also: Holding a job in the printer
Wait for the message to clear.
Remove all packing material from inside
the printer.
After pressing Go, you may see the
message, "Remove Cartridge and ITU
Packaging."
See also: Remove Cartridge and ITU
Packaging; "Step 5: Installing Supplies" in
the Setup Guide.