Lexmark C762 User Manual page 127

Symptom
Toner rubs off the
paper easily when
you handle the
sheets.
Gray background
ABCDE
ABCDE
ABCDE
Uneven print
density
ABCDE
ABCDE
ABCDE
Ghost Images
Clipped images
(Some of the print is cut
off on the sides, top, or
bottom of the paper.)
Cause
• The Type setting is wrong for
the type of paper or specialty
media you are using.
• The Texture setting is wrong for
the type of paper or specialty
media you are using.
• The Weight setting is wrong for
the type of paper or specialty
media you are using.
• The fuser is worn or defective.
• The Toner Darkness setting is
too dark.
• The print cartridges are
defective.
• The print cartridges are
defective.
• The transfer roller is worn or
defective.
• The image transfer unit is worn
or defective.
Toner level is low in the print
cartridges.
Guides in the selected tray are set
for a different size paper than
what is loaded in the tray.
Solution
• Change Paper Type to match the paper or
specialty media you are using.
• Change Paper Texture from Normal to Smooth or
Rough.
• Change Paper Weight from Plain to CardStock (or
other appropriate weight).
• Replace the fuser.
• Select a different Toner Darkness setting from the
printer driver before sending the job to print.
• Replace the print cartridges.
• Replace the print cartridges.
• Replace the transfer roller.
• Replace the image transfer unit.
Replace the print cartridges.
Move the guides in the tray to the proper positions
for the size loaded.
127