Lexmark C762 User Manual page 81

Message
No Jobs Found.
Retry?
Not Ready
Ovrflow Bin Full
Parallel <x>
Performing Self Test
Power Saver
Printer Calibrating
Print Jobs on Disk
Printing Alignment
Page
Printing Directory List
Printing Font List
Printing Job
Accounting Stat
Printing Menu
Settings
Prog Engine Code
What this message means
The four-digit personal identification
number (PIN) you entered is not
associated with any confidential print
job.
The printer is not ready to receive or
process data. Someone pressed Stop
to take the printer offline.
The mailbox's designated overflow bin
is full.
A parallel interface is the active
communication link.
The printer is running the series of
start-up tests it performs after it is
turned on.
The printer is ready to receive and
process data. It is reducing its
electricity consumption while idle. If
the printer remains inactive for the
period of time specified in the Power
Saver menu item (20 minutes is the
factory default), the Power Saver
message replaces the Ready message
on the display.
The printer is adjusting the color tables
to correct variations caused by
environmental conditions.
Jobs that were spooled to the hard
disk before the printer was last turned
off have not yet printed.
The printer is processing or printing a
test page that shows alignment values.
The printer is processing or printing a
directory of all files stored in flash
memory or on a hard disk.
The printer is processing or printing a
list of all available fonts for the
specified printer language.
The printer is processing or printing all
job accounting statistics stored on the
hard disk.
The printer is processing or printing
the menu settings page.
The printer is programming new code
into the flash memory.
81
What you can do
• Press Go to enter another PIN.
• Press Stop to clear the PIN entry
prompt.
See also: Holding a job in the printer
Press Go to make the printer ready to
receive jobs.
Remove the stack of paper from the bin to
clear the message.
Wait for the message to clear.
Wait for the message to clear.
• Send a job to print.
• Press Go to quickly warm the printer to
normal operating temperature and
display the Ready message.
Wait for the message to clear.
See also: Color Menu
• Press Go to print the jobs.
• Press Return or Stop to delete the jobs
from the hard disk without printing them.
Wait until the page has completed printing.
See also: <x> Alignment;
image transfer unit
Wait for the message to clear.
See also: Print Directory
Wait for the message to clear.
See also: Print Fonts
Wait for the message to clear.
See also: Job Acct Stat
Wait for the message to clear.
See also: Print Menus; Printing a menu
settings page
Wait for the message to clear.
Warning: Do not turn the printer off while
this message is displayed.
Aligning the